Maintenance Functions; Creating/Changing Administrative Data - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
4 NC data management

4.1 Maintenance functions

4.1.1 Creating/changing administrative data

Creating/changing NC administrative data
NC data properties should be created and maintained by authorized users (e.g.
administrators or machine operators). Authorization to change administrative data
must be assigned to these users (see also: Chapter 5 - User administration).
Depending on the parameters set, the NC administrative data is displayed on up to
four tab pages:

General

Information

Comment (always integrated)

Attachments
Alongside the existing standard screens, the following change/extension options
are available:

Changing the default list layout of the NC data display via the list editor.

Changing the field types for the output and edit fields for the properties via the
screen editor. The following types are available:

Output fields

Edit fields

Combination fields (combo boxes)

Checkboxes

Output checkboxes

Static output fields

Redefining data fields for describing NC data
Note
Different field types for the screen fields for creating and changing NC
administrative data can be defined.
They can be defined in the DNCFORMDESCRIPTION table using the database
fields FIELDTYPE and FIELDTYPE_NEW.
FBDN1/4-60
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07