Filter Function - Siemens Sinumerik 840D sl Function Manual

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions

4.5 Filter function

The filter function provides the user with a filtered view of the DNC Cell/Plant
archive. When the filter is activated, the user only sees the data that corresponds
to the filter conditions.
Note
Filters for DNC IFC SINUMERIK are created and assigned in DNC Cell/Plant.
In the DNC Administration and Data Management screens, the following filter
functions are available via the Filter softkey:

Filter on/off

Edit current filter

Filter selection
Fig. 4-8: Filter settings
FBDN2/4-26
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07