Siemens Sinumerik 840D sl Function Manual page 333

05.07
Password
This parameter designates the password for the specified user on the FTP server,
e.g. *********
Note
The entry in the DNC_IFC.INI configuration file is encoded.
Extract from the configuration file:
Section[FTP]
FTP-PW =A98CA48E93A092C79EA8A18E8FD59A96A1A696
Transfer mode
Two modes can be parameterized:

ASCII (1)

Binary (2)
Important
The Binary mode is recommended as transfer mode for the FTP connection
between DNC and DNC IFC SINUMERIK!
Extract from the configuration file:
Section[FTP]
FTP-Mode = 2
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
5 Configuration file
FBDN2/5-51