Creating New Users / Changing User Properties - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
5 User administration

5.2.2 Creating new users / changing user properties

To call up the dialog in which you can define users, choose New or Change in the
user screen. Here, you can create a new user or change the properties of an
existing user that you selected beforehand. The following parameters are available:

User name

Full name

Access password

User group (group to which the user belongs)

Area to be displayed
The two checkboxes allow you to select the large-format user interface and
activate the filter.
Fig. 5-2: Screen for creating/changing users
User name
The user name is the name specified when the user logs on to DNC.
Full name
Text can be entered in the Full Name field to provide additional information about
the user name. This text is only visible here.
FBDN1/5-116
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07