Login - Siemens Sinumerik 840D sl Function Manual

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions

4.7 Login

General
DNC IFC SINUMERIK normally starts with an automatic login, i.e. work is
performed with the user and his/her rights that are entered in the configuration file.
Further options for the login can be set.

If different users with different rights are to be able to log in, this must be set
manually in a Login dialog.

It is also possible to work with the user rights that correspond to the current
protection level of the SINUMERIK or the key-operated switch position.
The login procedure (automatic or manual login) can be set in the DNC_IFC.INI
configuration file or via the Configuration dialog.
FBDN2/4-32
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07
