Factory Reset; Tuner; Metronome - Boss GT-1000 Parameter Manual

FACTORY RESET

Initializes the GT-1000 to its factory-set condition.
Parameter Value
SYSTEM
U01-1–U50-5
FROM, TO
STOMPBOX
PEDALBOARD

TUNER

Here you can make settings for the TUNER.
Parameter Value
MONO TUNER
NORMAL, STREAM
MODE
BASS MODE OFF, ON
435–445 Hz
PITCH
(default: 440 Hz)
MUTE
BYPASS
OUTPUT
THRU
6-REGULAR,
6-DROP D,
POLY
7-REGULAR,
7-DROP A,
TYPE
4-B REGULAR,
5-B REGULAR
POLY –-,
OFFSET -5–-1

METRONOME

Here you can make settings for the METRONOME.
* You can select the output destination of the metronome sound.
* By pressing knob 1 you can set the metronome's BPM to the master
BPM value.
Parameter Value
BPM 20–250
1/1–8/1, 1/2–8/2,
BEAT
1/4–8/4, 1/8–8/8
OFF/ON OFF, ON
LEVEL 0–100
Explanation
System parameter settings
Settings for Patch Number U01-1 through
U50-5
Stomp box settings
Settings for Pedalboard mode
Explanation
Specifies the meter display method for the
monophonic tuner.
Turn this ON if using the GT-1000 with a
bass guitar.
Specifies the reference pitch.
Sound will not be output while tuning.
While tuning, the sound of the guitar being
input to the GT-1000 will be output without
change. All effects will be off.
Allows you to tune while hearing the
current effect sound.
* Only for monophonic tuner.
Selects the type of tuning for the
polyphonic tuner.
Adjusts the reference pitch of the
polyphonic tuner in semitone units relative
to standard tuning.
Explanation
Specifies the tempo.
Selects the time signature.
Turns the metronome on/off.
Adjusts the volume of the metronome sound.
MENU
49