Enabling The Input Audio To Be Output From The Line; Output Jacks (Input Line Out); Specifying What The [Output Level] Knob Will Adjust (Output Level Select); Restoring The Factory Settings (Factory Reset) - Boss RC-505 Owner's Manual

Parameter
Sys:InputLineOut
Sys:OutLevelSel
LINE+PHONES
Sys:USB Mode
STORAGE
Sys:MIDI Rx Ch
Factory Reset
Press [WRITE]

Restoring the Factory Settings (Factory Reset)

Restoring the RC-505's system settings (System parameters) to
their original factory default settings is referred to as "Factory
Reset. "
Factory Reset will return the system settings to their factory-set
state, and will erase (initialize) all phrase memories.
* This device contains demo data (Phrase Memory 95–99).
When you erase (initialize) all phrase memories, the
demo data will also be erased and cannot be recovered.
Please back them up as described in "Backing up to your
computer" (p. 27).
1.
Press the [SYSTEM] button a number of times until the
"Factory Reset" appears .
Factory Reset
Press [WRITE]
2.
Press the [WRITE] button .
The Factory Reset range setting screen appears.
Factory Reset
SYSTEM + MEMORY
Value Explanation

Enabling the Input Audio to be Output from the LINE

ON

OUTPUT Jacks (Input Line Out)

Specifies whether the input audio will be output from the LINE OUTPUT jacks (ON) or not output (OFF).
Specifying What the [OUTPUT LEVEL] Knob Will Adjust
(Output Level Select)
Specifies what will be adjusted by the [OUTPUT LEVEL] knob.
LINE +
The output volume of the LINE OUTPUT jacks and the PHONES jack will be adjusted.
PHONES
Only the volume of the PHONES jack will be adjusted.
Choose this if you want to adjust only the volume of the headphones.
PHONES
* To change the volume of the LINE OUTPUT jacks, use the [MEMORY/VALUE] knob to adjust the
"LineOutLevel" value that appears when you press the [SYSTEM] button twice from the play screen.
Reference
For details on the "Sys: USB... " parameters, refer to "USB-Related Settings" (p. 24).
Reference
1
For details on the "Sys: MIDI... " parameters, refer to "MIDI-Related Settings" (p. 25).
Reference
Refer to following "Restoring the Factory Settings (Factory Reset)".
System Settings (Settings for the Entire RC-505)
3.
Use the [MEMORY/VALUE] knob to specify the settings
that will be returned to their factory-set state .
Value Explanation
SYSTEM + The system settings will be returned to their factory-set
MEMORY state, and all phrase memories will be erased (initialized)
The system settings will be returned to their factory-set
SYSTEM
state
MEMORY All phrase memories will be erased (initialized)
* If you execute "SYSTEM + MEMORY" or "MEMORY," all of
the RC-505's phrase memories will be erased, and cannot
be recovered.
4.
If you want to proceed with the factory reset, press the
[WRITE] button .
5.
Once "Please turn off power . " appears in the display, you
can turn off the power .
23