Send/Return; Looper - Boss GT-1000 Parameter Manual

SEND/RETURN 1, 2

You can connect an external effects processor between the SEND jack
and RETURN jack, and use it as one of the GT-1000's effects processors.
The sound that is input to SEND/RETURN within the effect chain will
be output to the SEND jack. The sound that is input via the RETURN
jack will be input to SEND/RETURN within the effect chain.
Parameter Value
ON/OFF OFF, ON
STEREO LINK
OFF, ON
NORMAL
MODE
DIRECT MIX
BRANCH OUT
SEND LEVEL 0–200
RETURN
0–200
LEVEL
Explanation
Turns the SEND/RETURN on/off.
If this is on, you can use the two sets of SEND
and RETURN jacks to connect a stereo effect
unit.
The input to SEND/RETURN within the effect
chain will be output to the SEND jack, and the
input from the RETURN jack will be output
following SEND/RETURN.
Use this setting if you want to connect an
external effects processor in series within the
GT-1000's effect chain.
SEND RETURN
The input to SEND/RETURN within the effect
chain will be output to the SEND jack, and the
input from the RETURN jack and the input to
SEND/RETURN (the direct sound) will be mixed
and output following SEND/RETURN.
Use this when you want to mix the GT-1000's
effects sounds together with the sound with
the external effects device applied to it.
SEND RETURN
The input to SEND/RETURN within the effect
chain will be output to the SEND jack. The input
from the RETURN jack will be ignored.
For example, by placing SEND/RETURN in the
GT-1000's effect chain in front of reverb or
delay, this allows you to use the SEND jack as
a dry out.
SEND
Adjusts the volume of the output to the
external effects device.
Adjusts the volume of the input from the
external effects device.
* You can adjust this if the MODE parameter is
set to NORMAL or DIRECT MIX.
Parameter Value Explanation
Adjusts the phase between the GT-1000's
internal processing and an external effect unit
connected to the SEND/RETURN jacks.
ADJUST
0–100
You can adjust this if the MODE parameter is
set to NORMAL or DIRECT MIX.

LOOPER

Parameter Value Explanation
PLAY LEVEL 0–100 Specifies the loop playback level.
Effect
25