KTM 660 RALLY 2005 Supplement Manual page 39

MAINTENANCE WORK ON CHASSIS AND ENGINE
A
5
– Coat the thread of the screw [1] with Loctite 243 and mount the screw,
2
– Push the slide pin [2] inward. At the same time, push the slide lever [3]
1
3
– Now, the distances [A] on the left and on the right should be identical.
– Mount the jet needle and secure it with the screw [4].
– Position the slide cover and gasket and fasten with 2 screws.
A
4
– Connect the hose [5].
– Insert the 2 hose connections into the bores and fasten them with the
6
however, do not tighten it yet.
to the extreme right and tighten the screw [1].
Then, turn the cable disc and check if the throttle valve moves smoothly.
retaining clip [6].
»
39