KTM 660 RALLY 2005 Supplement Manual page 35

MAINTENANCE WORK ON CHASSIS AND ENGINE
4
– Remove the screw and the clip together with the bushing and pull the con-
1
– Remove the 2 screws and take the intake trumpet together with the O-
– Unscrew the idle-air jet [3] and the main air jet [4].
2
– Thoroughly clean all jets and other parts and blow compressed air through
– Clean the carburetor housing and blow compressed air through all the ducts
– Check all gaskets for damage and, if necessary, replace them.
3
nection piece [1] out of the carburetor.
ring [2] off the carburetor.
them.
in the carburetor.
»
35