KTM 660 RALLY 2005 Supplement Manual page 33

MAINTENANCE WORK ON CHASSIS AND ENGINE
2
4
5
Disassembling the carburetor (Keihin CR 39)
Note: Before you start disassembling the carburetor, you should look for a
clean workplace. It should offer you enough space to lay out all individual
components of the carburetor in perfect order.
1
– Dismount the carburetor and remove any coarse dirt.
– Remove the wire clip [1] and pull the ventilation hoses out of the
– Disconnect the hose [2].
– Remove the 2 bolts [4] and dismount the slide cover together with its
– Remove the bolt [5] and take the jet needle out of the throttle valve.
– Remove the bolt [6].
6
carburetor.
gasket.
»
33