Spark Plugs - Mercedes-Benz 300 SE 1989 Owner's Manual

High Mounted Stop Lamp
(21 W /32 cp bulb)
To replace the bulb, pull tabs on both
sides (arrows) - using a screw driver -
to release cover.
Press bulb down, turn cou n te rclo ck­
wise and remove.
82
License Plate Lamps (5 W bulb)
Loosen both the securing screws (1),
remove lamp and take out bulb,

Spark Plugs

This vehicle is equipped with spark
plugs as required fo r driving in the
USA. If additional information is
desired, your authorized
MERCEDES-BENZ dealer will be
happy to offer advice (see also rear
inside cover of O w ner's Manual).
Remove and install spark plugs (pro­
vided with sealing cone) only with
com bination wrench from the vehicle
tool kit o r with a recom m ended spark
plug wrench.
Tightening torque 1 0 - 2 0 Nm
(7 —15 Ib-ft).