Transfer Settings - Aiphone IX Series Operation Manual

4
Settings and Adjustments

Transfer Settings

Configure settings related to absent transfer, delay transfer, and schedule transfer.
*This is an administrator privileges setting. If "LOCK TRANSFER SETTINGS" is set to "ON," this cannot be
configured under user privileges.
Absent Transfer
If an incoming call is received during absent transfer, the incoming call will be automatically transferred to a transfer
destination.
Important
• When an incoming call is received from a VoIP Phone, the call will be received without transferring even when transfer is set.
To transfer the call, configure transferring on the IP-PBX.
■ Absent Transfer
Entry
Absent Transfer
■ Transfer Destination List
Entry
Station Number
Description
Select Enable / Disable for Absent Transfer. To
enable "Absent Transfer", set
Destination List (→page 204)". The TRANSFER
button shown on this station's screen can also
be used to change the setting.
Description
Configure the transfer destination station
(Number) for absent transfer. Up to 10 transfer
destination stations can be configured.
However, if the station making the outgoing call
is IX-MV, IX-DA(-*), or IX-BA, the transfer will be
made only to the station entered in "No.01."
IXW-MA cannot be configured as a transfer
destination.
Station programming
• Disable: Do not set
"Transfer absent transfer
• Enable: Set absent
transfer
3-32 digits
204
Settings Default values
Disable
Settings Default values
-