Aiphone IX Series Operation Manual page 175

4
Settings and Adjustments
Entry
Ringback Tone Count
[time(s)]
*1 Indicates a required field. Use the default values, unless a change is necessary.
Note
• When calling a VoIP Phone, this will be the shorter time of the time set for "Call Timeout" and the call duration configured on
the IP-PBX.
■ Call Origination Settings (outgoing call placed by Option Input 1 - 4)
Entry
Ringback Tone
Call Timeout *1
Ringback Tone Count
[time(s)]
Call Destination
Priority
*1 Indicates a required field. Use the default values, unless a change is necessary.
Description
Set the play count of ringback tone for outgoing
call.
Description
Select the sound to be played by the station
when placing a call. via option input.
Configure the call timer for calls.
Set the play count of ringback tone for outgoing
call.
Configure the outgoing call destination group.
Set the priority of calls.
Station programming
Settings
• 1 - 20 times
• Infinite: The calling tone
continues to play for the
amount of time set in
"Call Timeout."
Settings
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
Sound Registry
(→page
• 10 - 600 sec: Select to
set between 10-600 sec
(by 1 sec).
• Infinite: Keep calling
until call is answered.
• 1 - 20 times
• Infinite: The calling tone
continues to play for the
amount of time set in
"Call Timeout."
01 - 99
• Normal
• Priority
• Urgent
175
Default values
Infinite
Default values
Call Pattern 4
"Custom
172)".
60sec
Infinite
-
Normal