Performing Device Check - Aiphone IX Series Operation Manual

3
How to use

Performing Device Check

Check malfunctions for speaker, microphone, program, call button and option input of the stations that are registered
in this station's Address Book (except VoIP phones).
IX-MV, IX-DA, and IX-BA can be checked only for program malfunctions.
It is not possible to check for network camera malfunctions.
Malfunctions can also be automatically checked on a periodic basis
only) (→page 158)").
Device Check results are also stored on the microSD card.
Important
• Stations that cannot communicate cannot be checked for malfunctions. Use this function together with Line Supervision.
Performing manual Device Check
1.
Tap [Status] on the Home screen.
2.
Tap [Device Check].
Checking the System
("Supervision Settings (administrator privileges
3.
Enter the administrator password,
and then tap [ENTER].
This password is the same as the administrator
password for Web configuration. Contact your
system administrator for details.
• A short beep will be heard from each station, in
order to check for speaker/microphone
malfunctions.
• Once malfunction monitoring begins, the
screen returns to the Status screen.
If an error was detected, [Status] on the Home
screen turns from green to red.
84