Table of Contents
Advertisement
Quick Links
The IX-DVF-4 is an IX Series video door station with 4 call buttons for selective calling to IX-MV7
or IX-MV master stations. The IX-DVF-4 will connect to a network switch, and the call buttons are
connected to the first 4 contact inputs on the station. These inputs will be programmed to selectively
call different master stations, or groups of master stations.
IX-DVF-4
PACKAGE CONTENTS:
Security Driver
IX-DVF-4
4 Call Button
Door Station
Flush backbox &
tamper resistant screws
IX-DVF-4
IX Series Video Door Station with 4 Call Buttons
-INSTALLATION AND PROGRAMMING GUIDE-
1
2
3
4
5
Blank name
placard x4
NAMES & FUNCTIONS:
1. Camera
2. Microphone
3. White LED for night viewing
4. Speaker
5. Call buttons with integrated name placard
FEATURES:
•
IP video door station
•
4 call buttons for selective calling to master stations
•
4 name placards
•
Stainless steel faceplate with tamper resistant screws
INSTALLATION:
•
For flush mounting, cut a hole in the wall and use the
supplied back box.
Box dimensions are: 10-½" H x 5-
•
For surface mounting, use the SBX-IDVFRA surface
mount box. This box can mount to a standard 1 gang
box or to any flat surface.
Note:
When installing the IX-DVF-4 in the supplied back box, the call
button assembly may come loose. Push call button assembly
back in to position as necessary.
⁄
" W x 2-⅜" D
13
16
Pg. 1
Advertisement
Table of Contents
Related Manuals for Aiphone IX-DVF-4
Summary of Contents for Aiphone IX-DVF-4
- Page 1 IX Series Video Door Station with 4 Call Buttons -INSTALLATION AND PROGRAMMING GUIDE- The IX-DVF-4 is an IX Series video door station with 4 call buttons for selective calling to IX-MV7 or IX-MV master stations. The IX-DVF-4 will connect to a network switch, and the call buttons are connected to the first 4 contact inputs on the station.
-
Page 2: Specifications
This programming guide will cover how to program an IX-DVF-4 door station and four IX-MV7 master stations. The call buttons on the IX-DVF-4 are wired to the first 4 contact inputs on the station for placing selective calls. The door station and the associated IX-MV7 master stations will need to be programmed using IX Support Tool. - Page 3 Support Tool: Create New System - Step 1 Open the IX Support Tool and click File, Create New System. Step 1A Enter a System Name Step 1C Enter station quantities Step 1B Step 1D Select the No radio button under Wizard Programming Click Finish Support Tool:...
- Page 4 Support Tool: IP Address - Step 3 (continued) Step 3C Enter a starting IP address and subnet mask Step 3D Check the box beside each station or click the Select button Step 3E Click Ok in the Batch IP Address window then click Ok when the Pop-up appears NOTE:...
- Page 5 Support Tool: Station Association - Step 4 (continued) The first list (Station Settings List) will populate with the information based on what was entered in steps 1-3. The second list (Station List) will show what IX Support Tool found when it searched the network. Step 4A Select the radio button for the first master in the Station Settings List...
- Page 6 Option Input Function - Step 5 (Station View) The IX-DVF-4 has 6 Option Inputs. The 4 call buttons are wired to the first 4 Option Inputs. These inputs will need to be programmed to place a call. Switch to station view by clicking the Station View button.
- Page 7 Support Tool: Creating Door Station Groups - Step 6 (Station View) The Option Inputs on the door station can be programmed to call groups. The groups will need to be created before the inputs can be assigned. Step 6B Step 6C Step 6A IMPORTANT Ensure that you are...
- Page 8 Settings under “Select file type to be uploaded” Step 8D “Success” or “Failed” will display in the Status column. If a station displays Failed, select just that station and try the upload again. Aiphone Corporation Pg. 8 www.aiphone.com IX-DVF-4 Instr. tech@aiphone.com 1218 (800) 692-0200...