Vertical Encoder Wheel Protection Cover (J035 Only) - Ricoh BRG-P1 Field Service Manual

4. Replacement and Adjustment
3. Next, stretch to straighten the strip and hook the strip's right end to the tab.
• Make sure the black triangle is facing up.
• You must re-attach the extension bracket [A].
4. Pull out the driver [A], and then place the carriage back to its original position. Make sure that the
horizontal encoder strip is engaged in the sensor's recess [B].

Vertical Encoder Wheel Protection Cover (J035 only)

• Never touch the edge of the vertical encoder wheel when removing the protection cover.
1: Left side
74