Ricoh BRG-P1 Field Service Manual page 215

SC Pattern
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 2 error)
1
20242* D
Turn the main power switch off and then back on.
SC Pattern
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 3 error)
1
20243* D
Turn the main power switch off and then back on.
SC Pattern
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 4 error)
1
20244* D
Turn the main power switch off and then back on.
SC Pattern
Failure to form negative pressure in the maintenance unit (misalignment (failure
to detect by the feeler) / occasional failure to release air) (Tank 1 error)
20251 D
Turn the main power switch off and then back on.
SC Pattern
Failure to form negative pressure in the maintenance unit (misalignment (failure
to detect by the feeler) / occasional failure to release air) (Tank 2 error)
1
20252* D
Turn the main power switch off and then back on.
Error Name / Detection Criteria / Major Cause / Solution
Error Name / Detection Criteria / Major Cause / Solution
Error Name / Detection Criteria / Major Cause / Solution
Error Name / Detection Criteria / Major Cause / Solution
Error Name / Detection Criteria / Major Cause / Solution
Error Codes
213