Setup Menu; Changing Menu Item Settings - Sony HKCU-FP2 Operation Manual

Setup Menu

The CCU system and peripheral settings can be modified
using a picture monitor connected to the PIX output.

Changing Menu Item Settings

The menu screen is controlled using the knob and levers in the
MENU control block on the front panel.
Setting the CANCEL/ENTER lever to the ENTER position and
pressing the control knob perform the same function.
DISP/MENU lever and indicator
CANCEL/ENTER lever
Control knob
To display a menu page
Set the DISP/MENU lever to the MENU position.
When first powered on, the CCU MENU page is displayed.
To display the CCU MENU page
In menu display mode, turn the control knob to move the ,
arrow to TOP in the upper right corner of the menu page, then
press the control knob.
The CCU MENU showing the menu configuration is displayed.
* * C C U M E N U * *
c SY S T E M O P E R A T I O N
C C U C O N F I G U R A TI O N
N E T W O R K S E T T I NG S
Menu name
SYSTEM OPERATION
CCU CONFIGURATION
NETWORK SETTINGS
To select an item in the CCU MENU
Turn the control knob to move the , arrow up/down to the
desired menu item, then press the control knob.
The most recently viewed page in the selected menu is
displayed.
16
Setup Menu
Description
Input/output signal format and
system-related settings
CCU configuration settings
Network-related settings
To change the displayed page
1
Turn the control knob to move the , arrow to the
page number, then press the control knob.
The , arrow changes to a flashing ? question mark.
Flashing
<O UTP UT SE LEC T> ?S 01 TO P
O UTP UT: *C AME RA
B AR
T EST 1
T EST 2
PIX :*E NC R G
R &G G &B
WF :*E NC R G
R &G G &B
2
Turn the control knob to change the displayed page to
the desired page, then press the control knob.
The ? question mark changes back to the , arrow. Items
on the page can now be selected and changed.
To change a menu item setting
If a ? question mark is displayed beside the page number,
press the control knob to restore the , arrow. Items on the
page can now be selected and changed.
1
Turn the control knob to move the , arrow to the
desired item, then press the control knob.
The , arrow changes to a flashing ? question mark.
2
Turn the control knob to change the setting.
To cancel a changed setting
Set the CANCEL/ENTER lever to the CANCEL position
before pressing the control knob. The item is restored to
its current setting.
To suspend menu changes
Set the DISP/MENU lever to the MENU position to exit the
menu screen.
The DISP/MENU lever can be set to the MENU position
again to restart the operation.
3
Press the control knob.
The ? question mark changes back to the , arrow, and
the item setting is registered.
4
Repeat steps 1 to 3 to change other settings on the
same page.
To change a menu item with multiple input
fields
Some menus have items with multiple input fields.
Moving the , arrow to an item with multiple input fields and
pressing the control knob displays the input fields. Each field
needs to be set separately.
Turning the control knob moves the cursor between input
fields.
The following menu item has multiple input fields:
• NETWORK SETTINGS menu t<CNS SETTINGS> page
t MASTER IP ADDRESS
B
R &B RG B
B SE Q
R &B RG B