Sony HKCU-FP2 Operation Manual page 4

Wide range of audio functions
The CCU is fitted with two-channel microphone output, video
signals with embedded audio, and PGM (program) audio
input/output connectors. It also features an intercom system
with two independent channels, and supports four-wire and
RTS/Clear-Com intercom systems.
For information on support for RTS/Clear-Com systems,
contact a Sony service or sales representative.
Microphone volume control
The camera's microphone volume can be controlled via the
MIC REMOTE connector.
Character monitor signal output
The self-diagnosis status screens and setup menu can be
output as a text character display on the video output signal.
See "Video outputs" on page 3.
Rack mountable
The CCU can be installed in a standard EIA 19-inch rack. The
height of the unit is 1.5U.
Optional accessories
You can add new functions by incorporating the following
optional accessories.
For information about installing optional accessories, contact
a Sony service or sales representative.
HKCU-FP2 CCU Control Panel
This control panel can be mounted on the CCU in place of the
front panel.
It provides adjustment of basic functions using the operation
switches and volume control.
HZCU-MC3 support software for multi-camera
control systems
Installing this optional accessory enables support for multi-
camera control systems.
4
Overview