Required Components
Documentation
Hardware and Software
The PXI-7831R supports LabVIEW 7.0 or later, LabVIEW FPGA Module 1.0 or
Note
later, and NI-RIO 1.0 or later.
Getting Started with the NI 783xR
This section lists the items necessary for using the NI 783xR with Windows
2000/XP and the LabVIEW Real-Time Module.
The NI 783xR User Manual describes the electrical and mechanical aspects
of the NI 783xR and contains information about device operation and
programming. This document is included on the NI-RIO CD and is also
available at
ni.com/manuals
LabVIEW Help is available in LabVIEW by selecting Help»VI, Function,
& How-To Help.
PXI-783x R with Windows 2000/XP
The following items are necessary to set up and use the PXI-783xR on a
computer running Windows 2000/XP:
❑
NI PXI-783xR.
❑
The following software packages:
–
LabVIEW 7.1 or later.
–
LabVIEW FPGA Module 1.1 or later—required to develop
custom FPGA VIs.
–
NI-RIO 1.3 or later—included with the PXI-783xR.
❑
PXI/CompactPCI chassis and PXI/CompactPCI embedded controller
running Windows 2000/XP, or a computer running Windows 2000/XP
and a MXI-3 link to a PXI/CompactPCI chassis.
❑
At least one cable and device for connecting signals to the PXI-783xR.
.
2
ni.com