Required Items - National Instruments 7831R Getting Started

Required Items

Documentation
PXI-7831R with Windows 2000/XP
Getting Started with the NI 7831R
This section provides lists of the items necessary for getting started using
the PXI-7831R and the PCI-7831R device with Windows 2000/XP and the
LabVIEW Real-Time Module.
The NI 7831R User Manual describes the electrical and mechanical aspects
of the NI 7831R device and contains information about device operation
and programming. This document is included on the NI-RIO CD and is also
available at
ni.com/manuals
LabVIEW Help is available in LabVIEW by selecting Help»VI, Function,
& How-To Help.
Use the following items to set up and use the PXI -7831R with
Windows 2000/XP.
❑
PXI-7831R device
❑
The following software packages:
– LabVIEW 7.0 or later
– LabVIEW FPGA Module 1.0 or later—required to develop
custom FPGA VIs for the PXI-7831R device
– NI-RIO 1.1 or later—included with the PXI-7831R
❑
PXI/CompactPCI chassis and a PXI/CompactPCI embedded
controller running Windows 2000/XP or any computer running
Windows 2000/XP and a MXI-3 link to a PXI/CompactPCI chassis
❑
At least one cable and device for connecting signals to the PXI-7831R
.
2 ni.com