Device Components - National Instruments M Series User Manual

Device Components

Component
50-pin connector
USB connector
50-pin board mount socket
Mounting standoff,
using board mount socket
Mounting standoff,
using ribbon cable
*
J6 is available on USB-6212/6216/6218 OEM devices only.
†
You can use either one or both 50-pin connectors to board mount the USB-6212/6216/6218 OEM device.
‡
3/16 in. HEX female-to-female, 14 mm long.
**
3/16 in. HEX female-to-female, 1/4 in. long.
Modifying the USB Device Name in Microsoft Windows
Windows Vista/XP Users
NI USB-621x OEM User Guide
Table 1 contains information about the components used for interfacing
and interacting with the USB-621x OEM device.
Table 1. USB-621x OEM Components
Reference
Designator(s)
on PCB
*
J6 , J7
J5
†
—
—
—
You can change how the USB-621x OEM device name appears when users
install the device in both the Found New Hardware Wizard that appears
when the device is initially installed and in the Windows Device Manager.
Figure 9 depicts how a USB-6211 (OEM) device name appears in the
Found New Hardware Wizard and Windows Device Manager.
Manufacturer
3M N2550-6002UB
AMP 787780-1
3M 8550-4500PL (or equivalent)
RAF Electronic M1261-3005-SS
with M3 × 0.5 screw
Hardware
RAF Electronic 2053-440-SS
Hardware with 4-40 screw
8
Manufacturer
Part Number
‡
**
ni.com