National Instruments PXI-7830R Getting Started page 10

Using the NI 783x R with the LabVIEW Real-Time
Module for RTX
Note The NI-RIO device drivers and NI 783xR must be installed before adding RTX
support for the R Series device.
Getting Started with the NI 783xR
You can use the LabVIEW Real-Time Module for RTX with the NI 783xR.
After you have installed RTX, the LabVIEW Real-Time Module for RTX,
and RTX support from the NI-RIO Driver CD, complete the following
steps:
1. If necessary, close all NI software.
2. Select Start»Program Files»Ardence RTX»RTX»RTX Properties.
3. On the Plug and Play tab, right-click the name of your device and
select Add RTX INF Support.
4. Click the Apply button. RTX Properties returns a Warning dialog box.
Click OK.
5. In the RTX Properties window, click OK.
6. Right-click My Computer and select Properties.
7. Select the Hardware tab and click Device Manager.
8. For Windows XP, expand NI-RIO Devices, right-click the name of
your device and select Update Driver. In the Hardware Update
Wizard window, select Install the software automatically and click
Next. When the wizard finishes installing the software, click Finish.
For Windows 2000, expand NI-RIO Devices, right-click the name of
your device, and select Properties. On the Driver tab, click Update
Driver. In the Upgrade Device Driver Wizard window, click Next.
Select Search for a suitable driver for my device and click Next
three times. When Windows finishes installing the software, click
Finish.
9. In the Device Manager window, select View»Resources by
connection.
10. In the Device Manager window, expand Interrupt Request (IRQ).
Make sure that the NI 783xR is not sharing an IRQ with any other
devices. Refer to the RTX Runtime Help for information about
modifying a device.
11. Reboot your computer.
12. Select Start»Run. In the Run window, enter
and click OK.
10
net start nirtrtx
ni.com