Cabling Options; Related Documentation - National Instruments PXI-7830R Getting Started

Cabling Options

Cable
SH68-C68-S
SHC68-68-RMIO
NSC68-262650
NSC68-5050

Related Documentation

Getting Started with the NI 783xR
Accessing the signals on the I/O connectors requires at least one cable and
one signal accessory. Table 1 summarizes the National Instruments cables
available for use with the NI 783xR device.
Table 1. Cabling Options
Connector
MIO/DIO
MIO
MIO
DIO
Refer to the following documentation for information about the
LabVIEW FPGA Module, R Series hardware, and VIs necessary
for your application.
• LabVIEW FPGA Module Release Notes— describes the software
installation and other known software issues.
• LabVIEW FPGA Module User Manual— describes the LabVIEW
FPGA Module software and techniques for building applications in
LabVIEW with the LabVIEW FPGA Module.
• NI 783xR User Manual— describes the electrical and mechanical
aspects of the NI 783xR and contains information about its operation
and programming.
Description
For connecting signals from the MIO or DIO
connector to the NI SCB-68 terminal block.
For connecting signals from the MIO connector to
the SCB-68 terminal block.
Improves signal integrity and noise immunity.
Provides shielding on all AI channels and an overall
analog shield to reduce digital-to-analog crosstalk.
For direct connection of the NI 783xR to 5B and
SSR analog and digital signal conditioning
backplanes.
Routes signals to connectors that attach directly
to 5B backplanes (for analog signals) and SSR
backplanes (for digital signals).
For direct connection of the NI 783xR and
SSR backplanes.
Routes signals to connectors that attach directly to
SSR backplanes.
14 ni.com