Configuration - TRENDnet TV-IP862IC User Manual

TRENDnet User's Guide

Configuration

After completing the AutoRun Wizard, you are ready to use your camera. The
camera's built-in Web configuration utility is designed to allow you to easily access and
configure your TV-IP862IC camera. Open a web browser such as Internet Explorer® and
enter the IP address of your camera (Default IP Address: http://192.168.10.30). To log in,
type the Username admin and the password you created in the Setup Wizard. If you did
not create a password, the default password is admin. After entering your password,
click OK.
These initial steps are using Internet Explorer.
When you log in for the first time, the TRENDnet Cloud Terms of Use appears. Tick the
Accept check box and click Next.
© Copyright 2013 TRENDnet. All Rights Reserved.
The Change Your Account page appears. Under Admin User Name, leave it as "admin"
or change it accordingly. Enter the Old Password, enter the New Password, and then re-
enter the New Password to confirm it. Click OK to continue. Click Cancel if you wish to
discontinue.
The camera saves the information you have entered and restarts in 10 seconds.
TV-IP862IC
27