TRENDnet TV-IP862IC User Manual page 56

TRENDnet User's Guide
Motion Detection
In this section there are five configuration parts – Video Motion, Sensitivity, and
Drawing Mode. Each of these components derives its feature set from a live video
stream.
Motion Detection – Live Video
Video Motion Settings
1. Draw a red rectangle around the area on the viewable screen you wish to
monitor.
2. Click the Enable Video Motion checkbox
3. Under Sensitivity, enter a percentage of how sensitive you want the motion
detection to be. 1% is low and 100% is the most sensitive.
4. Click Apply to enforce your configuration.
Editing Video Motion Settings
1. Under Drawing Mode, click Erase motion area to erase the red rectangle from
the screen and motion field. or Click the Clear button to remove the video motion field.
2. Click Apply to accept your configuration changes.
Sound Detection
Sound detection allows the camera to pick up audio from the TV-IP862IC. When you
enable sound detection, the camera listens for sounds based on the sensitivity level you
created. The lower the sensitivity level the easier it is for the camera to detect sounds,
thereby activating the camera to start recording.
© Copyright 2013 TRENDnet. All Rights Reserved.
Click the checkbox to enable it. Then, in the drop-down list, next to Detection Sensitivity
Level, choose the level you want to use. It ranges from 50-90. Click Apply when you are
finished.
Tools
In this section there are two configuration parts – System, and Firmware Upgrade.
Tools – System
The first configurable option is: Backup Configuration File. Click the Backup button to
save this file to your local hard drive. Then click Save to save it.
TV-IP862IC
54