TRENDnet TV-IP862IC User Manual page 52

TRENDnet User's Guide
finished uploading from the FTP server. It's only available when trigger by Motion and
Sound is applied.
Passive Mode – It's used as Server/client initiation access to bypass any proxies.
Click the Test button if you wish to verify your FTP server information. Click Apply to
confirm the configuration settings.
For Email
Recipient E-mail Address – the email address you want to send information to
SMTP Mail Server – the mail server domain details
Port - the default Port number (465)
Username – the username settings provided by your email administrator
Password - the password settings provided by your email administrator
Sender Email Address – the email address of the sender
Interval – The interval range is 60 to 86400. The default interval is 600 seconds. This
determines the time between two video clips, and is only used when you trigger by
Always and Schedule.
© Copyright 2013 TRENDnet. All Rights Reserved.
Send next email after – This determines the interval to send the next video clip after the
previous video clip is completed via E-mail. It's only available when you trigger by
Motion and Sound.
Send next email after – the alert email interval times
Use SSL-TLS – this is a secure method (please consult your administrator before using
this setting). There are three options available: None, SSL-TLS or STARTTLS.
Click the Test button to proceed with a test. This will authenticate the email details with
your email server.
If the authentication is positive the test will be complete. If the test is a failure, the
result will not be successful. Click Apply to confirm the configuration settings.
Action – Snapshot
These settings control SNAPSHOT settings for your camera. The Trigger by settings are
similar to settings above, so please view the settings above. The Snapshot Type provides
for a Single snapshot or 6 snapshots at 1-2 second intervals. The Target FTP and Email
TV-IP862IC
50