TRENDnet TV-IP862IC User Manual page 70

TRENDnet User's Guide
-Set date and time manually
 Automatic Time Configuration
1. Synchronize with NTP Server
 Set Date and Time manually
manually setting/ Copy your PC's Time settings
 Enable/ Disable
Recording
1. Trigger Event:
-Always
-Motion Detection



-Sound Detection



-Scheduled
2. Recording Type


3. Record to:
-Micro SD card
-Samba network device
 Enable/ Disable
Video Clip setting
1. Trigger Event:
-Always
-Motion Detection

-Sound Detection

-Scheduled
2. Video Clip Type
© Copyright 2013 TRENDnet. All Rights Reserved.
Only during
Pre-event recording: Default is 5 seconds(between 0
to 5 seconds)
Post-event recording: Default is 5 seconds(between 0
to 60 seconds)
Only during
Pre-event recording: Default is 5 seconds(between 0
to 5 seconds)
Post-event recording: Default is 5 seconds(between 0
to 60 seconds)
Snapshot
-Source:Profiles3
Video
-Source:Profiles1, 2 and 4(Default is Profile2)
Scheduled
Scheduled
- Source: Profiles1, 2 and 4(Default is Profile2)
-Pre-event recording (Between 0~5 seconds)
-Maximum duration (Between 5~10 seconds)
3. Target :
-FTP Server








-E-mail Address









- Test
 Enable/ Disable
Snapshot setting
1. Trigger Event:
-Always
-Motion Detection

-Sound Detection

-Scheduled
2. Snapshot Type
-Source:Profiles3
-Single snapshot
-6 snapshot with 1 or 2 second interval

TV-IP862IC
FTP Server IP address and port number
User Name
Password
Path
Filename Prefix
Interval: Between 60~86400 seconds(for Schedule
and Always)
Send next FTP after (for Motion only)
Passive Mode: Enable/Disable
Recipient E-mail Address
SMTP Mail Server
Port
User Name
Password
Sender E-mail Address
Interval: Range :60 to 86400 seconds(for Schedule
and Always)
Send next E-mail after(for Motion and Sound)
Use SSL-TLS
Scheduled
Scheduled
3 frames before and 3 frames after motion frame
68