TRENDnet TV-IP862IC User Manual page 55

TRENDnet User's Guide
1. Setup the Preset Position – Once you have setup the Preset in the previous
configuration list, select it from the Preset Locations.
2. Click the Select button to transfer this preset to the Patrol Position.
3. Set the position of your Preset. This depends on the priority of Patrol Position –
which item you want to make your priority.
4. For each Patrol Position you can adjust the Dwelling Time (in seconds). This
indicates the time needed to span each Preset while Patrolling.
5. Click Save to continue and finish the process.
Action – SD Management
SD Card
The TV-IP862IC has a tiny Micro SD card slots at the back of the camera. Micro SD cards
are smaller than normal SD cards and require an adapter to work properly in a Micro SD
slot. Here you can format the SD card, select how many files you want to display on a
page, delete a page and also delete a file. When inserting a Micro SD card for the first
time, make sure you don't have any important data stored on the card because once
you format the drive that data is lost.
1. Format the SD Card
2. Select how many files you want to display per page.
3. Setup recording by going to Action, Recording.
4. Designate space for the recording and click Apply.
5. To delete a file. Select the file from the list, click the Delete checkbox and click
Apply.
© Copyright 2013 TRENDnet. All Rights Reserved.
TV-IP862IC
53