Electrical Connection - Fisher & Paykel OR90 Series Installation Manual

IMPORTANT!
This cooker must be connected to the mains power supply only by a suitably qualified person in accordance with current regulations.

 This cooker must be earthed.
The appliance must be connected to the mains checking that the voltage corresponds to the value given in the rating plate and that the electrical

cable sections can withstand the load specified on the plate.
It is recomended that the appliance is connected via a dedicated cooker circuit using a double pole cooker switch with a rating equal or greater

than the total loading of the cooker, with a minimum opening between the contacts of 3 mm.
Alternative connection methods may be available as long as they conform to current IEE wiring regulations.

The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C at any point.

Once the appliance has been installed, the switch or socket must always be accessible within 2 metres.

 Before carrying out any work on the electrical parts of the appliance, the appliance must be disconnected and locked off from the mains.
 This appliance must be connected to the electrical supply using a cable fitted with an appropriately rated plug. The plug must be compatible with
the socket-outlet fitted to the final subcircuit in the fixed wiring that is intended to supply the appliance.
Replacing the power cord
 If the power supply cable is damaged it must be substituted by a suitable cable available in the after sales service.
14
!5

ELECTRICAL CONNECTION

Location of
nameplate