Fisher & Paykel OR90 Series Installation Manual page 8

9
FITTING THE OPTIONAL BACKGUARD
Backguard
Remove the screws and spacers on the rear of the cooktop.

Assemble the backguard as shown and fix onto the back of the cooker using the

same screws and spacers.
Fix the backguard onto the cooker using the screws provided.

C
B
A
!0
LOCATION OF ELECTRICAL SUPPLY
Final position of cooker against wall
Left side
of cavity
Electricity and Gas
Floor
A
SUPPLY AREA DIMENSIONS
A Distance from either edge of Cooker to supply area
B Width of electrical area
C Width of gas only supply area
D Height of electrical supply area*
E Height of gas supply area*
f Depth of supply area
(ie maximum protrusion of gas and electrical connection from wall)
* Depending on adjustment of feet
f
C
Gas
E
D
B A
mm
860
210-260
700-750
19
79
74
9