Installation; Trigger Sensor Adjustment (Es 2000) - Graco LineLazer ES 1000 Installation, Repair, Parts

Gun Placement

Installation

1. Install vertical gun mount onto gun bar.
NOTE: Make sure all hoses, cables, and wires are
properly routed through brackets.
Trigger Sensor Adjustment (ES
2000)
1. Turn striper on. Engage trigger. Spray icon should
appear simultaneously with start of fluid spray.
ES 2000
24
No fluid spray
2. Turn screw in handle clockwise if spray icon
appears before fluid spray starts.
ti27801a
No spray icon
3. Turn screw in handle counterclockwise if fluid spray
starts before spray icon appears.
4. Continue adjusting screw in handle until timing of
spray icon and fluid spray are synchronized.
Adjustment of the gun cables might be necessary.
ti27883a
ti27802a
ti27803a
3A4603F Operation, Repair, Parts