Parameterizing The 3Rw40 Outputs - Siemens SIRIUS 3RW30 Manual

If the RUN function is set, you can control a line contactor during the startup process,
operation, or the set soft stop (refer to chapter Control with an optional main / line contactor
(Page 174))
For recommended circuits, refer to chapter Typical circuit diagrams (Page 161).
13.7.2

Parameterizing the 3RW40 outputs

Programming the ON / RUN output 13/14 on the SIRIUS 3RW40 soft starter
Figure 13-2
SIRIUS 3RW30 / 3RW40
Manual, 10/2018, NEB535199502000/RS-AB/005
Overview of buttons/LEDs for 3RW40 2 - 3RW404 and 3RW405 - 3RW407
Commissioning
13.7 Functions of the outputs
123