Acknowledging Faults; Sirius 3Rw405 And 3Rw407 Soft Starters; Setting The Reset Mode; Manual Reset - Siemens SIRIUS 3RW30 Manual

5.4.1.5

Acknowledging faults

For information on whether faults can be acknowledged, and on the corresponding LED and
output contact states, refer to chapter Messages and diagnosis (Page 57).
5.4.2

SIRIUS 3RW405 and 3RW407 soft starters

5.4.2.1

Setting the RESET MODE

Auto RESET
Manual RESET / (remote RESET)
RESET MODE button
By pressing the RESET MODE button, you define the reset procedure in case of a fault. This
is indicated by the AUTO LED.
5.4.2.2

Manual RESET

Manual RESET with the RESET/TEST button (LED AUTO is off)
You can reset a fault by pressing the RESET/TEST button.
SIRIUS 3RW30 / 3RW40
Manual, 10/2018, NEB535199502000/RS-AB/005
5.4 Functions of the RESET buttons
Yellow
Off (factory setting)
Functions
49