Conditions For Migration - Siemens SIMATIC HMI Series System Manual

5.3

Conditions for Migration

Introduction
You can migrate a WinCC project on any computer on which WinCC V7.4 has been installed.
The WinCC Project Migrator is included in the standard installation scope of WinCC V7.4.
Use Project Duplicator to copy the configuration data of the project to the migration computer.
For information on copying projects, refer to the "Working with projects" > "Copying and
duplicating projects" section in the WinCC Information System.
The code page settings of projects that you want to migrate in a single step must be uniform.
Requirements
The computer on which the migration should be performed must fulfill the following conditions:
Operating system
CPU
RAM
Free memory space on the
hard disk
User Rights
WinCC version installed
WinCC version project data
Licenses
System status
See also
How to migrate SQL Server 2000 databases (Page 142)
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
Requirement
The requirements are specified in the "Hardware requirements" and
"Software requirements" section of the installation instructions.
In addition, at least the size of the overall project. Migration increases
the size of the projects.
User must be a member of the "SIMATIC HMI" group
WinCC V7.4
WinCC V7.3, V7.2, V7.0 or V6.2 SP3
New V7.4 RC license or RT license for PowerTags
WinCC closed:
● Runtime deactivated
● WinCC Editors closed
● WinCC Explorer closed
Migration
5.3 Conditions for Migration
141