Siemens SIMATIC HMI Series System Manual page 71

Instead, select the "Download" option in the SIMATIC manager in the shortcut menu of the
operating system.
Installation of the examples projects
The supplied example projects are located on the WinCC DVD in the directory "Samples
\WinCC".
Installing OPC XML DA Server on a WinCC system
Use the WinCC Product DVD if you want to add an OPC XML DA Server installation to a
WinCC system. Do not install the application by means of Windows Control Panel.
Information for multi-user systems
Clients without their own project in multi-user systems
In multi-user systems, there may be a delay in the selection of the first picture following a
redundancy switchover for clients without their own project.
If you are changing the runtime language of a client without its own project in a multi-user
system, you will have to close WinCC on the client and exit the WinCC project on the server.
Only then will the language be altered.
Remote access from a client without its own project
The server data editor is not available in the WinCC Explorer on a client without its own project.
The "Archive Configuration" entry is not available in Tag Logging and Alarm Logging.
Notes on integration into SIMATIC Manager
Symbolic data block name: Maximum of 16 characters long
If you want to transfer tags from a data block to WinCC, the symbolic name must not exceed
16 characters.
Creating a DCF file
If the DCF file cannot be read after migration, a message regarding the corrupt file is written
to the migration log file. In order to create another DCF file, proceed as follows. The sequence
must be adhered to in all cases:
1. Open the project in the configuration mode.
2. Remember your own symbolic computer name (server prefix) needed for later export.
3. Remember the storage location of the imported server data.
4. Remember the preferred server and the default server.
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
WinCC Release Notes
2.3 Notes on WinCC
71