Siemens SIMATIC HMI Series System Manual page 129

Navigation on the "Contents" Tab
The "Contents" tab contains the table of contents of the WinCC Information System:
Tab
Shortcut menu in the table of contents
You can open all the hierarchical levels in the table of contents at the click of a mouse via the
shortcut menu with "Open all". Select "Close all" to close all the hierarchical levels again.
Navigation on a Help Page
There is an additional menu bar above the title of a page. Move the mouse pointer over a menu
item to call up the related list. Use the mouse to select the topic you wish to call up.
Tab
In Section
Instructions
Examples
Basics
Properties
Methods
Events
Objects
Tools > Open
Tools > Close
Tools > Verlauf
Additional Links
For some topics, there are links provided directly on the help page. These links are indicated
by a
additional information.
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
Description
Click this button to display the subordinate hierarchy levels of a book.
Double click this button to simultaneously open a help topic and display the subordinate
hierarchy levels.
Click this button to open the help topic on its own, without displaying the subordinate
hierarchy levels.
Double click one of these buttons to open a help topic.
Double click one of these buttons to open a an instruction for action.
Double click one of these buttons to open an example.
Description
Go to a specific topic within the page.
Provides links to step-by-step instructions.
Provides links to application examples and sample cases.
Provides links to additional information, e.g. definitions or details.
Provides links to information on the properties of objects.
Provides links to information on methods that are applied to objects.
Provides links to information on events that are applied to objects.
Provides links to information on related objects.
Opens all closed dropdown texts and dropdown images.
Closes all open dropdown texts and dropdown images.
Offers links to topics opened earlier. Maximum ten topics are saved in Verlauf.
symbol or underlined in blue. Click the underlined text or the blue arrow to call up the
Service and Support
4.4 Help on WinCC Documentation
129