System Messages - Siemens SIMATIC HMI Series System Manual

Trace point
no PCode
Error in FunctionName
Function %s unknown.
wrong ReturnTyp
Ende Start Transaction dwTransID:
Begin Start TransactionGTI dwTransID: d
Begin EndAct
Begin EndAct dwTransID:
Ende EndAct ok
Begin Compile
projectpath:
Ende Compile
printf aus Aktionen
Begin Disconnect dwAppID:
ChangeFct
LoadFct
DirInfo.szProjectLibDir:
DirInfo.szGlobalLibDir:
m_szIncludepathProj:
m_szIncludepath:
Thread said goodbye
Exception in Request
Timeout Variable ist nicht gekommen
6.4.2

System messages

Introduction
The following system messages are generated by the script controller and are entered in the
Logfiles WinCC_SStart_xx.Log or WinCC_Sys_xx.Log.
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
Level
3
3
3
3
d
d
d
d
6
6
6
3
6
6
6
6
6
6
6
1
1
1
WinCC diagnosis
Description
A Global Script action or a function con‐
tains no executable code (P-Code).
Measures:
Compile action or function.
Incorrect function name.
Unknown function
Return value type is invalid.
Transaction logged in.
A transaction with cyclic actions or Glob‐
al Script actions is logged in.
Transaction logging out initiated.
Transaction number
Transaction logging out completed.
Compiler process initiated.
Compiler: Aplib and Library directory
Compiler process complete.
Printf() outputs
An application logs out from the script
control.
Function was changed.
Reloading a function
Project functions path
Path of standard functions and internal
functions
Project path for a compiler include
General path for a compiler include
A job thread has ended unexpectedly.
An error has occurred in a request.
Tag request was not answered within 10
seconds.
6.4 Appendix
189