Siemens SIMATIC HMI Series System Manual page 104

What's new in WinCC V7?
3.9 Extended functionality for WinCC controls
● Display of the axes:
– Version 1: Each chart has its own axes.
– Version 2: All charts use a common time axis and/or value axis.
– Individual axes can be hidden if required.
● Dynamic display of the bars:
– With acyclic archive tags, the bar width depends on the time difference of the displayed
– The display is adjusted so that the bars do not overlap.
104
values.
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA