Siemens SIMATIC HMI Series System Manual page 37

The components already installed are displayed during setup. The following icons are used:
Icon
Scope of Installation
During custom installation of WinCC, you can choose between the following variants:
Typical
Complete
Expert mode
File server
WinCC client
1) If you are installing the "WinCC Client", you need an "RT Client" or "RC Client" client license.
You can also install or remove components and languages at a later time. Read the sections
"How to perform a supplementary installation" and "How to perform a supplementary
installation of languages" for more on this.
The required drive space depends upon the installed components. An estimated value is
shown in the status bar.
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
Meaning
Current version of program is installed.
Program is being updated.
Program setup conditions are not met. Click the symbol for more detailed information.
Program can be selected.
Program selected for installation.
Program cannot be selected (due to dependence on other programs).
Program selected for installation (cannot be deselected).
● WinCC Runtime
● WinCC CS
● Basic Process Control
● SQL Server
"Typical", including:
● OPC servers
● SmartTools
Custom installation:
You can select or deselect individual components in "WinCC Expert".
● WinCC Fileserver
● SQL Server
1) ● WinCC Runtime
● WinCC CS
● Basic Process Control
● SQL Express
WinCC Installation Notes
1.7 Installing WinCC
37