Count Of Tags In Each Transaction - Siemens SIMATIC HMI Series System Manual

6.3.5.6

Count of Tags in each Transaction

Description
Menu command "Count of Tags in each Transaction" lists the number of tags requested in the
transactions.
The output is in the following form:
● Name of the Application
● Number of the Transaction
● Cycle time, with which the tags use for logging in
● Number of tags
At the end of the list, the total sum of tags requested in transactions is output.
The numerical value defined in Cycle corresponds with the following trigger:
0
1
2
3
4
5
6
7
8
9
10
11 - 15
Example
===============================================================
Info to Transaktions: Count of Tags in Transaction
1.Applikation: GSC_RT Count of Tags in TransAction(0) in Cycle 0: 1
1.Applikation: GSC_RT Count of Tags in TransAction(0) in Cycle 4: 6
3.Applikation: PDLRuntimeSystem Count of Tags in TransAction(0) in Cycle 2: 1
Info to Transaktions: Count of Tags in Transaction 8
===============================================================
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
6.3 ApDiag Menu Commands
Upon change
250 ms
500 ms
1 s
2 s
5 s
10 s
1 min
5 min
10 min
1 h
User cycle 1 - 5
WinCC diagnosis
183