Video Input - Bosch VIP X1600 Installation And Operating Manual

EN | 46

Video input

You can activate the 75 Ohm terminating resistor for each video input on the
VIP X1600 module. To loop the video signal through, the terminating resistor
must be deactivated. Every video input is closed at the time of delivery.
Note
The numbering follows the labeling of the video inputs on the actual unit.
75 Ohm termination:
Select Off if the video signal is to be looped through.
Source type:
To allow video recorders to be connected as a video source, you can change the
characteristic of the video source from the preset value of Camera to Video
recorder. Video recorders require a more tolerant setting for the internal PLL as
a result of jitter effects caused by the mechanical components of a video
recorder.
Note
In some cases, selecting the Video recorder option can lead to an im-
provement in the video image even with a camera connected.
Configuration using a Web Browser
Installation and Operating Manual | VIP X1600
Bosch Security Systems | 2006-03 | V2.0