Start; Unlock - Ultra Start 90 Series Owner's Manual

PAGE 7
2 WAY REMOTE OPERATIONS
DISPLAY BUTTON PRESS
1

START

3 SECONDS TILL REMOTE BEEPS
MANUAL TRANSMISSION- RESERVATION MODE MUST BE SET TO REMOTE START THE VEHICLE
IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED. THE START FAULT
WILL CLEAR THE NEXT TIME THE SYSTEM IS LOCKED OR UNLOCKED. PLEASE SEE FAULT CODE
SECTION OF MANUAL FOR MORE INFORMATION.
1
STOP
1
EX RUN
1
IDLE
1
TURBO
#
1

UNLOCK

#
AUDIBLE
KEY- PRESS AND HOLD FOR
THEN RELEASE
KEY- PRESS AND HOLD
WHILE VEHICLE IS RUNNING
KEY- PRESS & RELEASE
WHILE RUNNING BY STARTER
KEY- PRESS & RELEASE
WHILE RUNNING BY KEY
PRESS & RELEASE
WHILE RUNNING BY KEY
PRESS & RELEASE ONCE
WHILE RUNNING BY KEY
PRESS & RELEASE FOR
STATUS UPDATE
FUNCTION
1 BEEP ACTIVATES THE REMOTE CAR STARTER FUNCTION.
PAUSE
THE DEFAULT RUNTIME IS 15 MINUTES.
TONE
1 BEEP TURNS OFF THE REMOTE CAR STARTER.
PAUSE
THE SYSTEM WILL AUTOMATICALLY TURN OFF AFTER THE DEFAULT RUNTIME
1 BEEP
(15 MINUTES) HAS EXPIRED.
1 BEEP RESETS THE RUN TIME.
PAUSE
THIS FEATURE WILL EXTEND THE CURRENT RUNTIME WHILE THE SYSTEM IS
TONE
RUNNING BY THE REMOTE START.
1 BEEP ACTIVATES THE IDLE MODE FEATURE.
PAUSE
THE VEHICLE WILL RUN FOR 15 MINUTES WHEN THE KEY IS REMOVED.
TONE
2 BEEPS ACTIVATES THE TURBO TIMER MODE FEATURE.
THE VEHICLE WILL RUN FOR 2 MINUTES WHEN THE KEY IS REMOVED.
2 BEEPS ACTIVATES THE RESERVATION MODE/ PRESS 2X FOR TURBO.
MANUAL TRANSMISSION ONLY (SEE RESERVATION MODE)
THE REMOTE WILL UPDATE THE CURRENT STATUS, LOCKED OR
2 BEEPS
UNLOCKED. THEN DISPLAY THE TEMPERATURE AND THEN THE
CLOCK. TO STATUS UPDATE THE RUNTIME PRESS AND RELEASE
THE TRUNK BUTTON.
90 & 95 SERIES
.