Run Time And Clock Adjustment - Ultra Start 90 Series Owner's Manual

PAGE 19
SYSTEM OPERATIONS
SYSTEM PROGRAMMING - Menu 1
M-1234
PROGRAM
PRESS START TO GO TO RUN TIME ADJUSTMENT
ON ON
RUN 15 TIMER
PROGRAM PROGRAM
+
#
P 12:35
PROGRAM
RUN TIME ADJUSTMENT
TO ENTER PROGRAM MODE
PRESS AND HOLD THE # BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
"PROGRAM" & "M-1234". PRESS START TO CONTINUE.
RUN TIME ADJUSTMENT
PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PRESS START BUTTON TO CHANGE TO 45 MINUTES.
PRESS # TO EXIT.
CLOCK SET MODE
TO SET THE CLOCK TIME
PRESS AND HOLD THE LOCK AND STATUS
THE REMOTE FOR 4 SECONDS. THE REMOTE WILL BEEP 1
TIME THEN THE PROGRAM AND CLOCK ICONS TURN ON.
PRESS THE LOCK BUTTON TO CHANGE FROM HH TO MM
PRESS THE UNLOCK BUTTON TO INCREASE THE SETTING
PRESS THE START BUTTON TO DECREASE THE SETTING
PRESS AND RELEASE THE STATUS BUTTON TO EXIT.
90 & 95 SERIES
OWNER'S MANUAL
BUTTONS ON