Service Mode - Ultra Start 90 Series Owner's Manual

PAGE 17
SYSTEM OPERATIONS
SYSTEM PROGRAMMING - Menu 1

SERVICE MODE

This feature is to be used when the vehicle is being serviced or if the remote
transmitter is lost or is not communicating with the system. This will disable the
remote starter from activating and disable the alarm of alarm models.
ACTIVATING SERVICE MODE
Turn the Ignition Key ON
(Leave in the ON position)
Press and hold the Valet switch for 8 to 15 seconds
(Time depends on "Valet Settings" Program Option)
The horn/ siren* will chirp 5 times as confirmation that the system
is in Service Mode. The LEDs on the antenna will turn on Solid.
DEACTIVATING SERVICE MODE
Turn the Ignition Key ON
(Leave in the ON position)
Press and hold the Valet switch for 8 to 15 seconds
(Time depends on "Valet Settings" Program Option)
The horn/ siren* will chirp 2 times as confirmation that Service
Mode is OFF. The LEDs on the antenna will turn on OFF.
*SIREN FUNCTION ON ALARM MODELS
90 & 95 SERIES
OWNER'S MANUAL