Table 2- 19 Page Layout (Printer Driver) - Siemens Simatic S7-300 CP 341 User Manual

Basic Principles of Serial Data Transmission
2.8 Configuration data
Page layout
The table below contains a description of the parameters for the page layout.
Table 2- 19 Page layout (printer driver)
Parameters
Left margin (number of
characters)
Lines per page (with header
and footer)
Separators/
Line end
Headers/Footers
96
www.gkbpx.com
Description
Number of spaces to
precede each line in the
body of the text, header or
footer. It is up to you to
ensure that a line is not too
long for the printer.
Number of lines to be printed
on each page. The number
of lines printed is calculated
on the basis of the
separators output. In other
words, all headers and
footers must be counted.
Characters which end each
line in the body of the text,
header or footer.
The body of the text, header
and footer must contain the
defined separator.
Text for up to two header
and footer lines; a header or
footer line is output when the
entry field in the parameter
assignment software
contains a text or at least a
blank space. If a text is
specified only for the 2nd
header or footer line, the 1st
header or footer line is
automatically padded with a
blank and printed. A blank
line is output before and after
the header/footer.
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
Range of values
0 to 255
1 to 255
0 (continuous printing)
CR (carriage return)
•
LF (line feed)
•
CR LF (carriage return
•
and line feed)
LF CR (line feed and
•
carriage return)
ASCII characters (text)
•
%P output conversion
•
statement for page
numbers)
(max. 60 characters)
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
Default value
3
50
CR LF (carriage return and
line feed)
Manual, 09/2008, A5E02191071-01