Table 5- 4 Identification Data Of The Cp 341 Module - Siemens Simatic S7-300 CP 341 User Manual

Configuring and Parameter Assignment the CP 341
5.5 Identification data
Identification data of the CP 341 module
Table 5- 4 Identification data of the CP 341 module
Identification data
Index 1 (data record 231/read only)
Manufacturer
Device name
Device serial number
Hardware revision
Software revision
Statistical
revision no.
Profile_ID
Profile–specific type
I&M version
I&M supported
Index 2 (data record 232/read and write)
HID
LD
Index 3 (data record 233/read and write)
Device installation date
Index 4 (data record 234/read and write)
Descriptor
120
www.gkbpx.com
Access
Read 00 2A hex (= 42 dec)
(2 bytes)
Read 6ES7341–1xH02–0AE0
(20 bytes)
Read The serial number of the module is saved to this parameter. This
(16 bytes) structure allows the unique identification of the module.
Read Provides information about the product version of the module.
(2 bytes)
Read Provides information about the firmware version of the module.
(4 bytes)
Read -
(2 bytes)
Read F6 00 hex
(2 bytes)
Read 00 04 hex (= 4 dec)
(2 bytes)
Read 00 00 hex (= 0 dec)
(2 bytes)
Read 00 01 hex (= 1 dec)
(2 bytes)
Read/write -
(max.
32 characters)
Read/write -
(max.
22 characters)
Read/write -
(max.16
characters)
Read/write (max. -
54 characters)
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
Default setting
The name of the manufacturer is saved to
this parameter
(42 dec = Siemens AG).
Order number of the module
x = A(RS232), B(TTY), C(RS422/485)
Not supported
Internal parameter
(to PROFIBUS DP)
Internal parameter (communication module,
to PROFIBUS DP)
Internal parameter
(to PROFIBUS DP)
Internal parameter (I&M0 and I&M1, to
PROFIBUS DP)
Plant (higher-level) designation of the
module.
Location designation of the module.
Installation date
Additional information
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
Description
Manual, 09/2008, A5E02191071-01