Software installation
3.1
Installing the driver
installation of the CP 5613 A2 / CP 5614 A2 driver
The driver is installed automatically when you install the "SIMATIC NET, PC Software,
Edition 11/2003" (or higher) or the Developer Kit (version 3.1).
Note
For the STEP 7 version approved for the communications processor, refer to the readme file
of STEP 7.
3.2
Uninstalling the driver
Uninstalling after using the communications processor (with SIMATIC NET PC software)
NOTICE
Uninstalling the driver
The procedure recommended here deletes the entire SIMATIC NET PC software on the PC
not only the driver for the communications processor.
● Initial situation: The "SIMATIC NET PC Software" DVD is installed on the computer.
● Uninstall the SIMATIC NET PC software as described in the Installation Instructions of
the "SIMATIC NET, PC Software" DVD.
Uninstalling the CP 5613 A2 / CP 5614 A2 driver
The driver is uninstalled automatically when you uninstall
the "SIMATIC NET, PC Software" DVD.
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
15