Technical Specifications
A.1
Technical Specifications of the CP 341
General technical specifications
The following table contains the general technical specifications of the CP 341.
You will find more general technical specifications for the SIMATIC S7-300 in the reference
manual entitled
Table A- 1
Technical specifications
Dimensions W x H x D
Weight
Current consumption from 24 V
(24 V DC infeed via front panel connector)
Area, static
Area, dynamic
Polarity reversal protection
Electrical isolation
Current consumption from backplane bus
Power loss
Indicators
Interrupts
Diagnostic interrupt
Diagnostic functions
Diagnostic information can be read out
•
Supplied protocol drivers
Transmission rate with 3964(R) protocol
Transmission rate with RK 512 computer link
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
Manual, 09/2008, A5E02191071-01
www.gkbpx.com
S7-300 Programmable Controllers, Module Specifications
General technical specifications
40 x 125 x 120 mm
0.3 kg
CP 341-RS 232C: Typ. 100 mA
•
CP 341-20mA-TTY typ. 100 mA
•
CP 341-RS 422/485: Typ. 100 mA
•
20.4 to 28.8 V
18.5 to 30.2 V
Yes
Yes, relative to all other voltages
Approx. 70 mA
CP 341-RS 232C: Typ. 2,4 W
•
CP 341-20mA-TTY: Typ. 2,4 W
•
CP 341-RS 422/485: Typ. 2,4 W
•
LEDs for transmitting (TXD), receiving (RXD) and
group faults (SF)
Programmable
Yes
ASCII driver
•
3964(R) procedure
•
RK 512 computer link
•
Printer driver
•
300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 76800, 115200 bps
(half-duplex)
300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 76800, 115200 bps
(half-duplex)
该文档是极速PDF编辑器生成,
如果想去掉该提示,请访问并下载:
http://www.jisupdfeditor.com/
A
.
213